Passenger Goods Lifts

Product Code: Passenger Goods Lifts

Passenger Vertical Platform Lift St Ives CambridgeshireTo supply, deliver, offload and install on a site properly prepared by others: 1 Off – MHS5000 Vertical Platform Lift in accordance with the attached specification: 12 months warranty including 1 service visit in 1st year. Telephone on carriage connected by others. Platform sizes 1100mm wide x 1500mm long. Steel landing door style A20 or A10 finished white RAL 9016. 1100mm high gate style A25 or A15 finished white RAL 9016. Voice AnnouncementOne touch landing call buttons. 415v 3 Phase electrics with direct start. Emergency battery lowering. Ramp provided at ground floor levelSUMMARY SPECIFICATIONRated Load – 400 kgRated Speed -0.15 m/s with direct startDrive System – Screw and rotating nut driven by 2.2 kW AC motor.Floors served – 2Travel – 2.7 metresConfiguration – Through EntryEnvironment – InternalFloor Area – 1550 x 1650 (width x depth) mmPit Depth – Ramp providedHeadroom – 1100mm – 2000mm required for clear headroom for personPlatform Size – 1100mm x 1500mm (wide x long).Carriage – 1100mm high vertical facia with control panel to one long side.Finish – The platform carriage is powder coat finished in metallic silver RAL 9006.Handrail – Smooth moulded anodised aluminium handrail fitted to console.Control panel – Floor, alarm and emergency stop buttons.Operation – Constant pressure control from carriage.Push buttons – Large easy to use tactile push buttons with LED illumination.Alarm – Button on control panel for battery supported alarm at lower floor.Overload – Over-load protection with visual and audible indication.Lighting – Push buttons on the control panel are illuminated with battery back upFlooring – Vinyl non-slip flooring – Dark GreySafety Edge – Fitted around sides of platform and above the carriageConstruction Insulated steel faced modules assembled on site to give a totally flush and smooth surface to both sidesA complete ready made steel shaft finished in white colour RAL 9016 inside/outside)Solid and smooth finish shield wall provided.Shaft panels not provided to machine sideLanding Doors – Type A1 – steel door with vision panel, Gate type A15 Steel – 1100mm high provided at upper level, Manual opening single swing doors with integrated self-closersFinishes – Door and frame – standard white RAL 9016 finishFire Rating – NoneOpening Size – 900 mm wide x 2000 mm highOperation – One touch control from landingsPush buttons – Large easy to use tactile push buttons with red/green halo illuminationAudible indication – Voice announcer to inform of lift arrivalPower Supply – 415 V, 3 Phase, 50Hz, 20A lockable isolator with direct startLocation – Permanent 20A rotary lockable isolator externally positioned min. 2100mmMotor – high within 500mm of electrical cabinet – integral with door frame at bottom floorEmergency lowering – Manual hand-windingWarranty – 12 months warranty from date of handover including 1st year service agreement with 1 routine visitSTANDARDSCE marked in accordance with Machinery Directive 2006/42/ECFully complies with European Standard EN81-41For a quotation please contact;Manual Handling Solutions58, Paige CloseWatlington, King's Lynn, Norfolk PE33 0TQTel 01553 811977sales@manualhandlingsolutions.co.ukhttp://goodslift.website