Mezzanine Goods Lift Kettering

Product Code: Mezzanine Goods Lift Kettering

Mezzanine Goods Lift KetteringHydraulic Mezzanine Goods Lift 500kg 3 stop with a single mast same side loading installed Hipwell Road Kettering Northamptonshire. Mezzanine goods lift with finished floor levels 0- 4941mm - 9591mm and a platform size 1500mm x 1500mm fitted with 1100mm high infilled panels on the non-loading sides and twin opening interlocked gates finished in Traffic Red RAL 3020.At the moment the mezzanine floor is only built as a single tier with the option of the second floor being added at a later date, for this project we supplied and installed 3 lifts.A self-supporting lift structure manufactured from 150mm x 150mm box section steel with clad infilled panels Grey RAL 7024. Goods lift fitted with 2000mm high double loading gates cladded with Perspex viewing panels at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level structure is 2310mm. Goods lift fitted with safety shoot bolts allowing for the operator to enter the lift platform safely while the lift is docked at the upper levels, the shoot bolts also eliminates any flex in the platform during loading and unloading. “Press to Go” one touch controls with emergency stop at all 3 levels fitted as standard. At the lower level a fixed ramp 1250mm long x 1580mm wide will be provided to assist loading on to the 120mm deep platform finished Red RAL 3020To prevent damage from pallet trucks and fork lift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 4Kw control voltage 24 volt IP55.General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor• Lift loaded and unloaded with hand pallet trucksInstallation; North Kettering Business Park, Hipwell Road, Kettering Northamptonshire NN14 1UAFor a quotation please contact;Manual Handling Solutions58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQTel 01553 811977sales@manualhandlingsolutions.co.ukhttp://www.manualhandlingsolutions.co.ukhttp://goodslift.website/http://goods-lifts.comhttp://www.goodslift.co.uk/