Mezzanine Floor Goods Lifts Enfield

Hydraulic Mezzanine Floor Goods Lift installed Enfield with through car loading at lower and upper level 3 entrances, exits in total. Mezzanine Goods Lift manufactured using a single mast with a lift capacity 1000kg and a clear platform size 1500mm x 1500mm, finished floor level FFL 4100mm. Lift platform fitted with 2 x 1100mm high infilled sheet panels on the non-loading sides in White RAL 9010 In addition the platform is fitted with shoots bolts / parking bolts, these engage from the platform and locate on the main ring beam of the support structure making it safe for personnel to enter the platform. Mezzanine Goods lift loaded externally with a Fork Lift Truck and on the opposite side unloaded with a pallet truck this side supplied with loading ramp size H120mm x W1580mm x L1750mm. “Press to Go” one touch controls with emergency stop fitted at each entrance. Hydraulic Mezzanine Floor Goods Lift self-supporting lift structure is manufactured from 100mm box section steel with clad infilled panels colour White RAL 9010. Goods lift manufactured with 2200mm high double loading gates clad with viewing panels at each level and these are fitted with interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level guarding is 2430mm. To prevent damage from pallet trucks and fork lift trucks the power pack / hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 3 phase, 400v, 3Kw control voltage 24 volt IP55 finished colour White RAL 9010 General Specification • Emergency lowering system when power is cut off • Pre wired control box included magnetic starter and overload fuse • Upper level travel limit switch and overload relief valve • Hydraulic cylinders feature emergency velocity fuse if line breaks • Control points are fitted to both ground and upper floor levels • The hydraulic power pack and electrical system housed separately at ground level • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor Installation; Crown Road, Enfield, Middlesex EN1 1DZ Manual Handling Solutions – Mezzanine Goods Lifts have a wealth of experience in the design, manufacturing process and installing cost effective mezzanine goods lifts in commercial, residential and industrial properties throughout the UK. We can design, manufacture and install a bespoke goods lift system that accommodates almost any space and any specification. Our range of goods lifts - hydraulic goods lifts are ideal for restaurants, hotels, factories, supermarkets, warehouses, theatres, retail including lightwell / basements For a quotation please contact; Manual Handling Solutions 58 Paige Close, Watlington, Kings Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslifts.website/ http://goodslift.website/