Menu

Goods Lift Gateshead Tyne and Wear

11-09-2018

Goods Lift – MezzLift 1000kg, with maximum working load 1000kg, enclosed in a self-supporting mesh shaft. The platform will be 1500mm x 1500mm and guarded 900mm high on the non-loading edges, fitted with a platform levelling system to lock the platform in place when it docks at the upper landing. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At the lower level a 1000mm long fixed ramp can be provided to assist loading on to the 75mm deep platform, or you may wish to consider preparing a 75mm deep sump for the lift to sit in, which would allow flush access on to the platform. A 2.2kw, 415 volt, three-phase and neutral supply is required terminated in an isolator at the lower level. Control is via a hold to run, push button control station adjacent to the gates at both levels. The power supply must be available at the point of installation for the lift to be commissioned otherwise a chargeable return visit will be required. Lead-time is four to six weeks from confirmation of order and due to the bespoke nature of the product it is our policy Installed Team Valley Retail Park, Team Valley Trading Estate, Gateshead, Tyne and Wear NE11 0BD For a quotation please contact; Manual Handling Solutions 58, Paige Close Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslift.website/

Visit the Manual Handling Solutions website for more information on Goods Lift Gateshead Tyne and Wear

ENQUIRY FORM

More News

  • Goods Lift Bryant Broadcast Croydon

  • Exxon Mobil Small Archive Storage Goods Lift

  • Goods Lift One Stop Shop Oldbury West Midlands

  • Mezzanine Goods Lift Dartford Kent